Celebrated woldwide, the OptiGrill represents the pinnacle in grilling technology. Patented technology and easy-to-read visual indicators provide an easy grilling experience from start to finish. The highly intelligent internal sensors measure the thickness and size of your food and calculate the time needed to prepare the perfect meal. The OptiGrill monitors the cooking level from rare, to well-done, and will alert you when each stage is reached. Blue then green at the start of cooking, yellow indicates the food is rare, orange when it is at medium and red for well done. It has six programmed settings with pre-set cooking temperatures and cycles that allow you to prepare red meat, poultry, burgers, pork, sandwiches, fish/seafood, or use the manual setting to prepare vegetables or personal recipes just the way you want it.
There's even a mode that allows you to cook from frozen.
The non-stick plates allow for less fat and more delicious, healthy meals.
The grill plates are detachable and dishwasher safe wich makes clean up fast and easy.
The large 600cm2 cooking surface and extra-large drip tray provides enough cooking space for the entire family.
With 1800 watts of power, OptiGrill will deliver fast results that will make dinner time easy and seamless.
6 cooking programs: Burger, Poultry, Sandwich, Sausage, Red meat, Fish
Cooking level indicator
For different types of food: Burger, Poultry, Sandwich, Sausage, Red Meat, Fish.
Monitor cooking progress for perfect grilling results from rare to well-done: indicates cooking progress and beeps at every stage to let you know when your meal is cooked the way you like it!
Automatic sensor cooking
Automatic thickness measurement: automatically adjusts to the right temperature for the size and thickness of any food type within the given programs.
Grill plates and drip tray are dishwasher safe
Non-stick die-cast aluminum plates and juice tray are dishwasher safe.
Extra-large capacity drip tray
Large juice tray and plates with a 7° angle to ensure cooking juices run off.
High performance: die-cast aluminum plates
High-performance die-cast aluminum plates with PTFE coating for an easy cleaning.
No. Once the first batch has finished open the grill fully and remove the food. Close the grill and press OK. You do not have to switch off the grill first. When the lights flash again, choose the mode that you want. The preheating phase should be a lot quicker than the first time as the plates will already be hot. When the Optigrill beeps to say it is ready, open the grill again and put the second batch of food on to the plates and continue as normal.
Before cleaning your grill, wait around 45 minutes while the device cools. To remove heavy food residue on the grill plates or on the side, we recommend you use a wooden or plastic spatula. To clean the grill and grill components, use a cloth soaked in hot water. Do not immerse the grill in water. Do not use abbrasive cleaning products or products containing alcohol or fuel since these may damage the device.
The appliance has not been fully opened when placing the food on the grill plates before cooking. Solutions: To allow the appliance to detect the start of the cooking cycle, the appliance must be completely opened before each cooking cycle. If not, the cooking cycle will not start. Completely open the grill then close it and press OK.
• The grill plates have not been properly placed on the plate hooks and therefore, the sensors cannot correctly detect the food. To rectify this problem, turn off the appliance and allow it to cool down. Then install the cooking plate correctly. • You started cooking before preheating had finished. To rectify this: turn off the appliance, remove the food, close the appliance. Turn the appliance back on, select then confirm a programme and wait until preheating has finished. • You started cooking food between the plates without preheating. To rectify this: turn off the appliance, remove the food, close the appliance. Turn the appliance back on, select then confirm a programme and wait until preheating has finished. • If the problem persists despite adhering to the advice above: the appliance may need to be repaired.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself and take it to an approved repair centre.
If you leave the appliance open between 2 cooking cycles it will turn to safety mode and will have to be reset. To ensure the best cooking results, you should not open the appliance for more than 1 minute during cooking cycles. RESET by unplugging it for 2-3 minutes and restart full cooking cycle.
This may be due to improper cleaning of the cooking plates. We recommend that you pre-wash your cooking plates in the following manner before putting them in the dishwasher to remove any food residue: - Soak the plates in hot water and degreasing dish soap for about 30 minutes, - Scrub both sides of the plate with a sponge or a dish brush, hot water and degreasing dish soap, - Rinse, - Put in the dishwasher.